Keep Scrolling for More Images!

Shop By Category
  • Safety Banners
  • Forklift-Tough™ Floor Sticker Signs
  • Forklift Intersection Safety
  • Fire Extinguisher Signs

Safety Banners for Fire Safety and Fire Prevention.

                Safety Banners built in Memphis, Tennesseee USA..

                Our Safety Banners for fire prevention and "PASS" are used by most of the Fortune 500 companies!   

80% of all manufacturing process material, powders and dusts are combustible! Safety Banners Can Help prevent fires.

PASS Fire Extiinguisher Use safety banner item 1042Fire Safety can save lives. Over 150 major fires occur in workplaces on an annual basis. Fire is the third 

workplace fire safety workplace safety banner item 1135

leading cause of accidental deaths in the United States. The Occupational Safety and Health Administration (OSHA) estimates that most of these accidents can be prevented if proper safety 

precautions at job sites are initiated. This poses a serious problem for exposed workers and their 

fire extinguisher use #1138

employer. The OSHA Fire Prevention Standards establish uniform requirements to ensure that fire hazards in U.S. workplaces are evaluated, safety procedures implemented, and that the  proper fire prevention information is transmitted to all affected workers.

Fire extinguishers are designed to put out or control small fires. A small fire, if not checked immediately, will soon spread out of control. In  fact, most big fires start out as small ones. It is important, therefore, that you equip your workplace with the proper fire extinguishers as part of your fire protection plan. It’s also the law. For a fire extinguisher to be effective, the following conditions must be met:

Fire safety banner #1137 for workplace safetyA - The extinguisher must be right for the type of fire;

B - It must be located where it can be easily reached;

C - It must be in good working order;

D - The fire must be discovered while it is still small;

E - The person using the extinguisher must be trained to use it properly.

Fire Extinguishing Methods:

Fires can be extinguished in one or four ways:

1. By cooling: Water is used to cool the burning material below the temperature at which it starts to burn.

2. By smothering: Carbon dioxide (CO2) or foaming agents are used to smother the burning material so that air is excluded.

Fire extinguisher use item 1277 safety banners3. By removing the fuel: This is usually very difficult to do. An example is turning off a fuel line.

4. By disrupting the chemical chain reaction or interrupting the flame: Dry chemicals or halon are used to do this. 

 

SafetyBanners.Org

1657 Shelby Oaks Drive N.

Memphis, TN 38134

Serving American industry since 1995

256BitSecureSiteaurhorize net logoAbout Us    |    Download Application for Credit    |    A Trustworthy Supplier

© 2006 - 2018 SafetyBanners.Org, all rights reserved.
All images and designs are the copyrighted property of SafetyBanners.Org, all rights reserved, and shall not be reproduced without written permission.

Shop By Category